Diamond disc cutting 1A1R 125x22x25x1.6mm Edge Dry

Diamond disc cutting 1A1R 125 Edge Dry Disk diameter 125 mm Diameter landing hole 22.22 mm Blade depth: diamond 25 mm, the thickness of which 1.6 mm. Disc thickness 1.6 mm. The maximum speed of rotation is 12250 rpm. Maximum speed of 80m/s. Operates under 45 Cooling: No Cooling. Materials for use: Ceramics, Ceramic. Packed in a colored box. 45 Easy!Removal of ceramic tiles under 45 degrees of scraping is the most common operation in finishing works. Many craftsmen perform it manually with a grinding machine. Requirements for a diamond disc: sufficient hardness of the body, at the same time soft cutting, the possibility of grinding the edge. These are the properties that Edge Dry has. A wide double-sided diamond-bearing layer of 25 mm reinforces the body, makes it rigid. At the same time, the diamond-bearing ligament with the honeycomb pattern of the layer makes the cutting soft and high-performance. A large plane creates a support effect, directing the disk strictly in a straight line. In addition, you can polish the edge of the end of the tile. With such a disc, the scraper 45 becomes a complete pleasure! The disc is produced with a diameter of 125 mm, a seat of 22.2 mm. It is used on the CFM without the use of cooling. Vertical - speed (m pog. / min), horizontal - edge quality Data are given under the conditions: • porcelain, 10 mm; • 125 mm; • serviceable UCM with a capacity of 1.4 kW, with a rotation frequency of 11,000 rpm; • air temperature +25 C. Data are reference. Under other operating conditions, performance parameters may differ significantly / # / - Edge quality / 3 / - Medium / 4 / - Good / 5 / - Excellent