Diamond disc cutting 1A1R Gres Master 125x22.22x10x1.4mm

Diamond disc cutting 1A1R 125 Gres Master 125x22.22x10x1.4mm Disk diameter 125 mm Diameter landing hole 22.22 mm Blade depth: diamond 10 mm, thickness of which 1.4 mm. Disc thickness 1.4 mm. The maximum speed of rotation is 12250 rpm. Maximum speed of 80m/s. Cooling: No cooling. Materials for use: ceramics, porcelain. Packed in a colored box. It's never faster. Every year there are new types of porcelain tiles with increased frost resistance, abrasion. Increasingly, granite stoneware with a thickness of 14, 20 mm is used. Such materials are very difficult to cut with conventional diamond discs. There is combustion, deformation of the disk, stop in the cut. The Gres Master disc is designed specifically for such challenging applications. The turbocharged grooves of the diamond-bearing layer are effectively incorporated into the durable material, cooling the cutting zone. The disc gently sinks even into the thickest porcelain. Thanks to such high performance, it is the fastest drive of the entire Distar range. The disc will also cut regular porcelain porcelain, but at a very high speed. The quality of the edge is inferior to the disc Esthete and Decor Slim, but very often such cleanliness is not required, especially where the junction of the tiles is closed with molding. Available in diameters of 115, 125 mm. It is used on the CSM without the use of cooling. Vertical - speed (m pog. / min), horizontal - edge quality Data are given under the conditions: • porcelain, 10 mm; • 125 mm; • serviceable UCM with a capacity of 1.4 kW, with a rotation frequency of 11,000 rpm; • air temperature +25 C. Data are reference. Under other operating conditions, performance parameters may differ significantly / # / - Edge quality / 3 / - Medium / 4 / - Good / 5 / - Excellent