Diamond Disc Cutting Turbo Beton 230x22.23x9

Diamond disc cutting Turbo Beton 230x22.23x9 10170085391 Disk diameter 230 mm. The diameter of the landing hole is 22.23 mm The width of the tooth is 9 mm with a diamond coating. Disc thickness is 2.6 mm. The maximum speed is 6650 rpm. Maximum speed of 80m/s. Cooling: no refrigeration. Materials for use: Brick, Unreinforced concrete, paving slabs. Packed in a colored box. Toothy layer is an instant start. Now the end of the diamond-bearing layer is made in the form of teeth. This allows you to start working at a high speed even without burning the disk. Circle diamond cutting Turbo Beton is an excellent solution for working with concrete products. In general, the tool is used for a wide range of materials. It is mainly used for cutting concrete and concrete products, as well as when working with bricks and pavement tiles. In the range there are two versions of discs with an external diameter of 125 and 230 mm. The disk is used on any CCM with a standard landing socket of 22.23 mm. During practical use, the circle showed high rates of operation. The disc showed a sufficient resource of 40 linear meters, as well as a high speed of 45 cm linear per minute. Note, the work was carried out when cutting concrete of the brand M400 with reinforcement of 8 mm with a density of reinforcement 6 pcs / m linear. Vertical - speed (mg / min), horizontal - resource (mg) The data are given under the conditions:
Concrete M400, reinforcement 12 mm, 6 pcs./1 m Pog;
230 mm;
Cut depth - 6 cm;
The data is reference. Under other operating conditions, performance parameters can be...