Diamond Disc Turbo 125 Beton 125x22x8x2.2mm

Diamond disc cutting DISTAR Turbo 125 Beton 125x22.22x8x2.2mm Disk diameter 125 mm Diameter landing hole 22.22 mm Blade depth: diamond 8 mm Disk thickness 2.2 mm. The maximum speed of rotation is 12250 rpm. Maximum speed of 80m/s. Cooling: No cooling. Materials for use: brick, concrete, reinforced concrete. Packed in a colored box. Toothy layer is an instant start. Now the end of the diamond-bearing layer is made in the form of teeth. This allows you to start working at a high speed even without burning the disk. Circle diamond cutting Turbo Beton is an excellent solution for working with concrete products. In general, the tool is used for a wide range of materials. It is mainly used for cutting concrete and concrete products, as well as when working with bricks and pavement tiles. In the range there are two versions of discs with an external diameter of 125 and 230 mm. A disk is used on any CCM with a standard landing socket of 22.22 mm. During practical use, the circle showed high rates of operation. The disc showed a sufficient resource of 40 linear meters, as well as a high speed of 45 cm linear per minute. Note, the work was carried out when cutting concrete of the brand M400 with reinforcement of 8 mm with a density of reinforcement 6 pcs / m linear.